|ALL GROUPSBACK TO IGU PRODUCTION - PROFILE BENDERS - RAHMENBIEGER|
|Make/Type:||Lisec / BSV-45 A|
|Group-Subgroup:||7 IGU Production - Profile Benders - Rahmenbieger|
|Condition:||05 USED As seen and approved|
|Info:||This bender can easily bend aluminium and thermix material.
(Maybe just a soft option to activate for plastic material)
The vending head is for aluminium design so:
-aluminium will be good
-thermix will be bentable but this material is not the easier one because of his shape memory)
Bending material possible
-aluminium, steel, synthetic (thermix, chromatec ultra&ultra plus, Tgi M)
depending on the tooling.
Fast Bender ANK
ALU, STEEL, Thermix, TGI-Spacer Tecnoform
The BSV-45NK is a fully automatic spacer profi le bending machine for processing all conventional, synthetic and composite
spacer frames for the production of insulating glass.
The system is equipped as a standard for processing aluminium, steel, stainless steel, synthetic and composite profi les. The
profi le magazine can be equipped with 4, 6, 8 and 15 profi le storage slots. The profi le magazine is fi lled manually by sliding
the profi les into the individual slots from the support surface.
Fully automatic profi le transport, cutting and bending. With the new saw unit, it is possible to cut aluminium, steel, stainless
steel, synthetic profi les and in particular composite profi les with just one saw blade. Profi le types, order data, the geometry
and the desired split can be selected or also entered via an easy-to-use control panel. Optionally, the machine control system
can be monitored by remote control as well as by online data transfer
Processing of aluminium, steel, stainless steel, synthetic and composite
4, 6, 8 or 15-slot profi le magazine
One saw blade for cutting all profi les types
Shape capability according to the LiSEC shape catalogue
High accuracy thanks to the precision-guided profi le transport
Easy operation via touchscreen
Swisspacers can also be processed
Automatically adjustable bending die for aluminium, synthetic and
Swisspacer profi les
Profile height 6 - 8,5 mm
Profile types aluminum, steel, stainless steel, plastic
Profile width 6 - 24 mm adjustable in increments (aluminum, steel, stainless steel)
8 - 24 mm adjustable in increments (plastic)
8 - 24 mm adjustable in increments (Swisspacer)
Profile magazine 4-slot
Minimal size 250 x 100 mm
Maximal size 6.600 x 3.300 mm
|Options:||The bending machine BSV 45 does not have the heating system to bend this type of spacers. When they buying the machine it was prepared only for aluminum spacers. Then I managed to modify the parameters of the machine to work with only one type of TGI- spacer, warm edge spacers from the Tecnoform company in Italy. This typ of spacer have a wire to reinforced and not let to break when it's bending.|
GMR offers solutions to the global flat glass industry. Your needs regarding flat glass production and -processing is our professional responsibility, serving you with tailored solutions that match your ambitions and business goals. service locations in Belgium-The Netherlands-Germany-Russia-India-South Africa-USA.
Please stop by for a coffee when you're in the neighborhood!