|ALL GROUPSBACK TO LAMINATING - AUTOCLAVES|
|Make/Type:||Scholz / 3500 x 7500 mm|
|Group-Subgroup:||8 Laminating - Autoclaves|
|Condition:||05 Machine as seen and approved - no warranty|
" S C H O L Z " - HOT AIR AUTOCLAVE PLANT
Technical specifications (archive pictures)
1. Combined steam heating- and cooling coil
Designed for receiving - 2 glasses racks each 3600 mm long One behind the other.
Glass Size: Width: 3210
The autoclave with the following parameters:
Inside diameter: about 3500 mm (to be verified by supplier)
Usable length: 7500 mm
plus space for the installation of an
additional heat exchanger, of 260 m2 surface, incl. the necessary sockets.
The original heat exchanger will be used as cooling coil of 520 m2 and the
additional heat exchanger will be used as heating coil.
Pressure: 15 bar
Taking the following working conditions as a basis:
1) air temperature increase (infinitely variable)
from 20 to 150°C within abt. 60 minutes
2) air temperature decrease (infinitely variable)
from 150° to 45°C within abt. 90 minutes
3) Working pressure: 15 bar, adjustable
4) With the following filling weights per cycle:
abt. 45.000 kgs glass
(spec.heat c = 0.20 kcal/kg grd = 0,83 kJ/k)
abt. 6.000 kgs steel - bogie and racks
(spec.heat c = 0.12 kcal/kg grd = 0,50 kJ/k)
5) Cooling water:
- max. Inlet temperature = 34°C
- Runback temperature = 39°C
6) Working voltage of the plant: 400 V, 50 cps
7) guarantee that already a short time after
Stabilization of the temperatures in the autoclave,
At a pressure of 15 bar, temperature differences
Will not exceed +/-2°C.
GMR offers solutions to the global flat glass industry. Your needs regarding flat glass production and -processing is our professional responsibility, serving you with tailored solutions that match your ambitions and business goals. service locations in Belgium-The Netherlands-Germany-Russia-India-South Africa-USA.
Please stop by for a coffee when you're in the neighborhood!