|ALL GROUPSBACK TO DRILLING - DOUBLE-SIDED DRILLING|
|Make/Type:||Enkong / ZJ 30|
|Group-Subgroup:||4 Drilling - Double-sided drilling|
|Condition:||05 Machine as seen and approved - no warranty|
II. Technical Parameters
1. Hole Diameter: φ5~φ220
2. Glass thickness range: 3 ~20 mm
3. Max. size of Processing glass: 2700×2200mm
4. Height of Working Table: 1000mm
5. Distance between drilling center and back column:1300 mm
6. Hole at drilling axis and drilling bit connection end: taper k=60°, screw hole G1/2
7. size: 2200*2700mm(L×W×H) 2200×2500×1700mm (with floating working table)
8. Weight: 1200KG (with floating working table)
9. Power: 4.95Kw(with air compressor 1.5kw)
III. Whole Structure (please refer to the Figure1)
The functions of each part as follows:
A: Glass pressing device--pressing the glass for drilling.
B: Upper drill-bit control device--for drilling glass manually.
C: Rotating speed adjustment and belt tension device--for the adjustment of upper and lower drill shaft speed and belt tension.
D: Electric control box & panelfor operating the machine.
E: Float working talefor supporting the larger glass.
F: Cooling system--offer cooling water for drill-bit. Meanwhile it offers the strength to support small piece of glass that easy for moving.
G: Air system--supporting the impetus for clamping device, feeding of lower drill-bit and float working table.
H: Collector deviceuse for receive and stock the glass.
glass horizontal drilling machine
GMR offers solutions to the global flat glass industry. Your needs regarding flat glass production and -processing is our professional responsibility, serving you with tailored solutions that match your ambitions and business goals. service locations in Belgium-The Netherlands-Germany-Russia-India-South Africa-USA.
Please stop by for a coffee when you're in the neighborhood!